Ремонт и прошивка игровых приставок FreeBoot XBOX 360 в Донецке
- Смена програмного обеспечения (прошивка XBOX 360) специализированым оборудованием.
- Прошивка и установка FreeBoot.
- Ремонт, замена привода XBOX 360.
- Замена лазерной головы.
- Реболл GPU чипа, ошибка Е-74, отсутствие изображения (заменяем GPU).
- Устранение <трех красных огней смерти>, устранение зависания XBOX 360.
- Чистка смена термопасты приставки (что значительно продлит ее жизнь).
- Модернизация системы охлаждения, установка кулеров.
- Ремонт джойстиков.
- Замена разъемов питания.
- Ремонт материнских плат.
- Ремонт джойстиков и блоков питания.
- Замена лазера, ремонт привода.
- Замена выгоревших и поврежденых разъемов.
Как выставить пороги температур в DL или при сборке фрибута
Кладем файлы cpukey.txt и nanddump.bin папку \Data\my360 Multi_Builder-а . В этой же же папке находится текстовый файл options.ini , в котором мы и будем вносить интересующие нас изменения по температурному режиму . Открываем файл любым текстовым редактором , переходим к секции ALL machines options . нас интересуют следующие строки :
КОД:
; will alter the input smc config target temp for CPU when fans are on auto, value is in Centigrade
; example: cputemp=60; sets 60C as the target temp for the auto fan speed algo
cputemp =
; will alter the input smc config target temp for GPU when fans are on auto, value is in Centigrade
; example: gputemp=60; sets 60C as the target temp for the auto fan speed algo
gputemp =
; will alter the input smc config target temp for EDRAM when fans are on auto, value is in Centigrade
; example: edramtemp=60; sets 60C as the target temp for the auto fan speed algo
edramtemp =
; will alter the input smc config overheat/overload temp for CPU when fans are on auto, value is in Centigrade
; example: cputemp=60; sets 60C as the overheat/overload temp for the auto fan speed algo
overcputemp =
; will alter the input smc config overheat/overload temp for GPU when fans are on auto, value is in Centigrade
; example: gputemp=60; sets 60C as the overheat/overload temp for the auto fan speed algo
overgputemp =
; will alter the input smc config overheat/overload temp for EDRAM when fans are on auto, value is in Centigrade
; example: edramtemp=60; sets 60C as the overheat/overload temp for the auto fan speed algo
overedramtemp =
Для cpu , gpu , dram можно задать по два значения , номинальное и пороговое . Номинальное это та температура , при которой консоль начинает управление вентилятором , для её удержания . Пороговое (с пометкой over) это температура , при достижении которой консоль переключит вентилятор в другой (более агрессивный) режим работы , чтобы сбить температуру до номинальной . Ну а если уж и это не поможет и температура превысит допустимые значения , консоль автоматически отключится . Прописываем желаемые значения . Первоначально я использовал вилку 60/75 градусов , (у вас могут быть свои предпочтения) , но ознакомившись с установленными режимами в оригинальном дашборде (для SLIM консоли) :
cputemp = 82
gputemp = 78
edramtemp = 76
overcputemp = 89
overgputemp = 82
overedramtemp = 82
Для примера оптимальные следующие настройки(опять же , применительно для SLIM):
КОД:
; will alter the input smc config target temp for CPU when fans are on auto, value is in Centigrade
; example: cputemp=60; sets 60C as the target temp for the auto fan speed algo
cputemp = 62
; will alter the input smc config target temp for GPU when fans are on auto, value is in Centigrade
; example: gputemp=60; sets 60C as the target temp for the auto fan speed algo
gputemp = 58
; will alter the input smc config target temp for EDRAM when fans are on auto, value is in Centigrade
; example: edramtemp=60; sets 60C as the target temp for the auto fan speed algo
edramtemp = 56
; will alter the input smc config overheat/overload temp for CPU when fans are on auto, value is in Centigrade
; example: cputemp=60; sets 60C as the overheat/overload temp for the auto fan speed algo
overcputemp = 79
; will alter the input smc config overheat/overload temp for GPU when fans are on auto, value is in Centigrade
; example: gputemp=60; sets 60C as the overheat/overload temp for the auto fan speed algo
overgputemp = 72
; will alter the input smc config overheat/overload temp for EDRAM when fans are on auto, value is in Centigrade
; example: edramtemp=60; sets 60C as the overheat/overload temp for the auto fan speed algo
overedramtemp = 72
Сохраняем файл . Запускаем Run.exe